2003 Mercedes-benz C

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper not working (3.4 (a))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Side repeater with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

oil leak

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Under trays not allowing full inspection.

Nearside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Under trays not allowing full inspection.

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Under-trays fitted obscuring some underside components

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Engine management light on.

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Engine management light on.

Under-trays fitted obscuring some underside components

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front coil spring broken (2.4.C.1a)

Engine covers fitted obscuring some components in the engine bay

Engine management light on.

Under-trays fitted obscuring some underside components

Offside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Offside Rear Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

nearside front rim protector bead damaged.