MOT Status
ValidMileage
181,997 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Back plate loose
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Back plate loose
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Brake pipe corroded, covered in grease or other material All pipes plastic coated and swollen (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Backplate loose
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced and chassis (6.1.1 (c) (i))
Brake hose ferrule excessively corroded Both rear hoses on subframe (1.1.12 (f) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake pipe corroded, covered in grease or other material All pipes plastic coated and swollen (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Backplate loose
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced and chassis (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material All pipes covered in plastic and swollen (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced rear chassis and subframe (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Brake pipe corroded, covered in grease or other material All pipes covered in plastic and swollen (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced rear chassis and subframe (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Brake pipe corroded, covered in grease or other material All pipes swollen and covered in plastic (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced NSF Jacking point, rear chassis and subframe (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Nearside Rear Road wheel fractured (5.2.2 (a)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material All pipes swollen and covered in plastic (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced NSF Jacking point, rear chassis and subframe (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Brake pad sensor adrift
Brake pipe corroded, covered in grease or other material All pipes plastic coated and swollen in places (1.1.11 (c))
Front Brake hose slightly deteriorated Both front (1.1.12 (b) (ii))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Jacking point (6.1.1 (c) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced rear of chassis and rear subframe (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material All pipes plastic coated and swollen in places (1.1.11 (c))
Central Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material all brake pipes covered in plastic and swollen (1.1.11 (c))
Central Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material all brake pipes covered in plastic and swollen (1.1.11 (c))
Central Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front brake discs worn
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Front registration plate insecure (6.3.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear registration plate insecure (6.3.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate character(s) likely to be misread (6.3.4b)
Rear registration plate delaminated (6.3.1d)
Rear registration plate deteriorated (6.3.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the BMW 3 Series?
Based on 12,840,406 MOT tests across 1,004,285 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
6003 PG is a 2007 BMW 3 Series in Blue with a 1,995cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2007 BMW 3 Series models, the average MOT pass rate is 78.5% with a typical mileage of 86,578 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 3 Series fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 485,475 recorded failures. If you're considering buying 6003 PG, it's worth having these areas checked by a mechanic before committing.
The BMW 3 Series typically stays on UK roads for around 37 years. At 19 years old, this BMW 3 Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of 6003 PG?
You can check the full history of 6003 PG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was 6003 PG registered?
6003 PG is a 2007 BMW 3 Series, first registered on 16 March 2007.
Is 6003 PG safe to buy?
The MOT history for 6003 PG shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does 6003 PG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on 6003 PG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.