MOT Status
ValidMileage
63,913 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Headlamp aim too high (4.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Headlamp aim too low (4.1.2 (a))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Front Exhaust system not adequately supported (7.1.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear coil spring broken (2.4.C.1a)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
rear brake recording little or no effort nearside (3.7.B.5a)
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
engine light staying on
exhaust starting to deteriorate
rear n/s tyre starting to wear
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
engine light staying on
exhaust starting to deteriorate
rear n/s tyre starting to wear
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both fro
engine light on
exhaust is starting to corrode and deteriorate
rear n/s tyre is starting to wear
slight play in front lower ball joint rubber mountings
some steering and suspension bushes are starting to deteriorate
Exhaust has part of the system slightly deteriorated (7.1.1a)
engine light on
front n/s tyre is starting to wear on edges
some steering and suspension bushes are starting to deteriorate
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
both front tyres are starting to wear on edges
engine light on
some steering and suspension bushes are starting to deteriorate
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Nail in offside rear tyre
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring incomplete (2.4.C.1a)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
some steering and suspension bushes are starting to deteriorate
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Nail in offside rear tyre
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
some steering and suspension bushes are starting to deteriorate
How Reliable is the BMW 3 Series?
Based on 12,840,406 MOT tests across 1,004,285 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
800 CMR is a 2005 BMW 3 Series in Grey with a 1,995cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2005 BMW 3 Series models, the average MOT pass rate is 76.3% with a typical mileage of 91,247 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 3 Series fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 485,475 recorded failures. If you're considering buying 800 CMR, it's worth having these areas checked by a mechanic before committing.
The BMW 3 Series typically stays on UK roads for around 37 years. At 21 years old, this BMW 3 Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of 800 CMR?
You can check the full history of 800 CMR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was 800 CMR registered?
800 CMR is a 2005 BMW 3 Series, first registered on 8 June 2005.
Is 800 CMR safe to buy?
The MOT history for 800 CMR shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does 800 CMR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on 800 CMR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.