1986 Ford Capri

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside headlight mounting is corroded

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

all rear suspension and driveline components have been heavily undersealed, will need further investigation

all vehicle inner arches are heavily undersealed, will need further investigation

both front seats have slightly worn seat rails causing slight movement but not excessive.

nearside and offside complete front to rear of underbody has been heavily undersealed, will need further investigation

nearside and offside front to rear outer sills are heavily undersealed, will need further investigation

nearside and offside rear boot floor is heavily undersealed, will need further investigation

nearside and offside rear floor is heavily undersealed, will need further investigation

steering rack has a slight weep from output shaft

vehicle has been heavily modified

vehicle has been extensively repaired and heavily under sealed

Nearside Direction indicator not working (4.4.1 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

vehicle has been extensively repaired and heavily under sealed

Exhaust has a minor leak of exhaust gases (7.1.2)

Front to rear heavily undersealed

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front to rear heavily undersealed

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front to rear and o/s front to rear is corroded

Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Direction indicators not working (1.4.A.2c)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Direction indicators not working (1.4.A.2c)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Direction indicators not working (1.4.A.2c)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Rear Direction indicators not working (1.4.A.2c)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Offside Front Upper Suspension spring mounting prescribed area is excessively corroded x 2 (2.4.A.3) DANGEROUS

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front to rear and o/s front to rear is corroded

Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

chip in windscreen

front number plate cracked

vehicle heavily undersealed

Headlamp not working on dipped beam both (1.7.5a)

Nearside Rear Subframe mounting prescribed area is excessively corroded inner flitch (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Suspension component mounting prescribed area is fractured outer sill cracked (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Suspension component mounting prescribed area is excessively corroded both sills in several places (2.4.A.3)

Subframe mounting prescribed area is corroded but not considered excessive both rear chassis rails (2.4.A.3)

chip in windscreen

front number plate cracked

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside washer jet requires attention soon

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Direction indicator not working (1.4.A.2c)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside washer jet requires attention soon

Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

boh front inner flitches holed and corroded but not in perscribed area

both front and rear inner flitches slightly corroded

both front, centre and rear floors, chassis rails, undersills and outersills slightly corroded

offside centre exhaust rubber missing but system still supported

rear differential damp

rear velence slightly corroded

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

rear differential leaking

several corosion spots showing

slight seapage of power steering around steering rack

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

oil leak around enginbe

rear differential leaking

several corrosion spots showing

slight seapage of power steering fluid around rack

Oil leak

Tyre worn close to the legal limit (4.1.E.1)

rear differential damp

Driver's seat insecure (6.2.A.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Fuel system component insecure (7.2.1)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Exhaust system not adequately supported (7.1.1)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Tyre worn close to the legal limit (4.1.E.1)

oil leak around engine

rear differential damp

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

all of vehicle has been very heavily undersealed

both front track control arm bushes slightly perished

both outersills slightly corroded in several places

both rear chassis rails slightly corroded

both rear inner flitches slightly corroded

both rear tyres wearing on inner edges

coil spring corroded (2.4.C.1b)

nearside outersill slightly damaged

nearside rear chassis rail requires attention soon

Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

both front coil springs slightly corroded

both front track control arm bushes slightly perished

both outersills slightly corroded

both rear chassis rails slightly corroded

both rear inner flitches slightly corroded

both rear tyres wearing on inner edges

nearside outersill slightly damaged

slight play in both rear anti roll wrap round bushes

vehicle has been heavily undersealed

both rear exhaust rubber slightly perished

nearside rear tyre wearing on both edges

offside front inner flitch slightly corroded

Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

both rear exhaust rubber slightly perished

nearside rear tyre wearing on both edges

offside front inner flitch slightly corroded

both front tyres wearing on inner edges

nearside outersill slightly damaged

various corrosion spots showing

Brake performance not tested (3.7.A.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.C.1b)

Service brake: efficiency below requirements (3.7.C.1a)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front jacking points require attension soon

nearside front tyre on legal limit

offside front tyre wearing on inner edge

offside outer wing requires attension soon

offside trackrod end gaitor split

seat rails require attension soon

slight lift in steering wheel