MOT Status
ValidMileage
52,852 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed (7.1.1 (a) (i))
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and holed (6.1.1 (c) (i))
Offside Rear Upper Outline marker lamp not working (4.2.1 (a) (ii))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced small hole /corroded (6.1.1 (c) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources very dim (4.7.1 (b) (i))
unable to fully inspect chassis repairs due to sealers
Vehicle structure is repaired but structural rigidity is not significantly reduced unable to fully assess welding due to sealer (6.1.1 (d) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Spare wheel carrier insecure (6.1.5 (a))
Vehicle structure is repaired but structural rigidity is not significantly reduced unable to fully assess welding due to sealer (6.1.1 (d) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Exhaust has a minor leak of exhaust gases silencer split at seam (6.1.2 (a))
Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction x2 (3.1 (a) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Stop lamp(s) adversely affected by the operation of another lamp inop with side lights on (4.3.3 (b))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Exhaust has a minor leak of exhaust gases silencer split at seam (6.1.2 (a))
Front Windscreen washer not working (3.5 (a))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Tyre slightly damaged/cracking or perishing Both front (5.2.3 (d) (ii))
Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))
Vehicle outer sills corroded
Brake performance not tested (1.2.1 (g))
Offside Front Tyre fouling a part of the vehicle brake hose (5.2.3 (f))
Nearside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Tyre slightly damaged/cracking or perishing Both front (5.2.3 (d) (ii))
Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))
Vehicle outer sills corroded
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe rear mounting (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting point (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Service brake excessively fluctuating both front (1.2.1 (e))
Service brake excessively fluctuating both rear (1.2.1 (e))
front tyres perrished
rear tyres perrished
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen at bottom of screen (3.5 (a))
Offside Rear Service brake excessively binding locked on. unable to check w/brg. and tyre (1.2.1 (f))
Nearside Front Brake pipe slightly corroded to flexi (3.6.B.2c)
Nearside Front h/lamp water ingress
Front registration plate deteriorated (6.3.1d)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim too low (1.8)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Brake pipe slightly corroded to flexi (3.6.B.2c)
Nearside Front h/lamp water ingress
Offside Front Brake pipe inadequately supported (3.6.B.1)
Front Inner wings partially under sealed. not completed
Front chassis area part touched up with paint.. not finished
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Inner wing-- closing grommet missing.. chassis box section filling with road salt/debris
Nearside wiper deteriorated
Brake load sensing valve linkage seized (3.6.E.3)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Upper Rear position lamp(s) incorrect colour lense missing (1.1.A.3e)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Front Inner wings partially under sealed. not completed
Front chassis area part touched up with paint.. not finished
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Inner wing-- closing grommet missing.. chassis box section filling with road salt/debris
Nearside wiper deteriorated
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front inner wing excessive corrosion within 30cm of strut top mounting (6.1.B.2) DANGEROUS
front cross member corroded at mountings
nearside and offside front chassis legs corroded
vehicle structure weakened by corrosion
underneath of vehicle corroded around and above front subframe and inner wheel arches
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.C.1d)
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
A12 JVT is a 2003 Peugeot Boxer in White with a 2,178cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 56.3%.
Across all 2003 Peugeot Boxer models, the average MOT pass rate is 72.7% with a typical mileage of 48,738 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying A12 JVT, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 23 years old, this Peugeot Boxer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of A12 JVT?
You can check the full history of A12 JVT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was A12 JVT registered?
A12 JVT is a 2003 Peugeot Boxer, first registered on 1 April 2003.
Is A12 JVT safe to buy?
The MOT history for A12 JVT shows 32 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does A12 JVT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on A12 JVT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.