1990 Land Rover Range Rover

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Outer Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Position lamp insecure (4.2.1 (c) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Outer Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Headlamp lens slightly defective Side light lens damaged (4.1.1 (b) (i))

Nearside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor pan (6.2.2 (d) (i))

Offside Rear Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Door shut (6.2.2 (d) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak front shock (5.3.2 (b))

Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Rear Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt axle ball joint (5.3.4 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

nearside front out rigger holed and corroded

offside front and centre out riggers corroded

offside rear chassis mounting area corroded

oil leak around rear axle area

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body mounting area holed and corroded (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body mounting area. under front wheel arch front end (6.2.2 (d) (i))

nearside front out rigger holed and corroded

offside front and centre out riggers corroded

offside rear chassis mounting area corroded

oil leak around rear axle area

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Body has slight corrosion Both front (6.1.B.2)

Central Rear Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Brake pipe seriously damaged (found during steering lock to lock check) (2.2.D.2b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Axle swivel joint has slight play (2.5.A.3b)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Body has slight corrosion (6.1.B.2)

Nearside Axle swivel joint has slight play (2.5.A.3b)

Nearside Drag link end ball joint has slight play (2.2.B.1f)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)