2001 Mazda MX-5

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal both rear sills been repaired and painted (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened light corrosion on both subframes (5.3.3 (b) (i))

all welding repairs been covered and painted

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis leg corroded near subframe (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill corroded (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases rear tail section join leaking (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal both rear sills been repaired and painted (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened light corrosion on both subframes (5.3.3 (b) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Rear Registration plate insecure (0.1 (a))

Brake hose slightly deteriorated both rear (1.1.12 (b) (ii))

Coil spring corroded both front (5.3.1 (b) (i))

EML on

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Brake disc worn, pitted or scored, but not seriously weakened front and rear pitted (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Tyre obviously under inflated front and rear (5.2.3 (l))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both rear floor to sills (7.1.1 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust emissions likely to be affected by an exhaust leak emissions to high (8.2.1.1 (b))

Exhaust emissions likely to be affected by an exhaust leak front pipe to centre joint blow ** exhaust emissions effected (8.2.1.1 (b))

Items removed from driver's view prior to test ()

Items removed from driver's view prior to test ()

unable test indicators ** alarm not reseting

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

mil light on

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (welded and covered with black paint ) (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting repair covered in underseal subframe mount (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (welded and covered in black paint ) (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

both outer sills slightly corroded

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake fluid contaminated (1.8 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Advise corrosion at n/s and o/s front chassis's

Advise travel on hand brake lever

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Undertray not fully secure (8.1.1 (b) (i))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases tail pipe (7.1.2)

Exhaust system not adequately supported tail pipe (7.1.1)

Front registration plate delaminated broken (6.3.1d)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has little reserve travel (3.1.6b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside front brake binding (3.7.B.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear coil spring corroded (2.4.C.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front and rear discs poor condition

Centre Brake pipe excessively damaged (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

centre fuel lines damaged

front and rear discs poor condition

front brake discs corroded on inner faces

rear brake pads getting low

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

front brake discs corroded on inner faces

rear brake pads getting low