2006 Ford Ka

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Central Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Windscreen washer not working (3.5 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bush split (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Road wheel badly distorted (5.2.2 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to sill (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bush split (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Macpherson strut pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Front Windscreen wiper blade defective Both (3.4 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Underbody covered in wet underseal

sill repairs covered in sealant like substance and still wet to touch

Front Macpherson strut pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))

Front Windscreen wiper blade defective Both (3.4 (b) (i))

Front Windscreen wiper not working (3.4 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Underbody covered in wet underseal

sill repairs covered in sealant like substance and still wet to touch

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to inner sill (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Tyre has ply or cords damaged inner (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Nail in tyre ()

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear service brake low effort, reason for failure

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Brake pipe corroded, covered in grease or other material Various. (1.1.11 (c))

Exhaust has a minor leak of exhaust gases Back Box. (6.1.2 (a))

Fuel Pipe/s corroded ()

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Nail in tyre ()

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Tyre obviously under inflated Spare. (5.2.3 (l))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Brake fluid warning lamp illuminated (1.1.10 (f))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Brake fluid warning lamp illuminated (1.1.10 (f))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

front tyres worn on edges

offside headlamp condensated

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Headlamp aim too low (1.8)

offside headlamp condensated

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Headlamp aim too low (1.8)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)