MOT Status
ExpiredMileage
278,382 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)
Fuel system component leaking (7.2.3)
Hazard warning switch faulty (1.4.B.1d)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front coil spring incomplete (2.4.C.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.C.1b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Registration plate lamp not working (1.1.5c)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mercedes-benz 200?
Based on 54,250 MOT tests across 7,909 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
A216 OPW is a 1984 Mercedes-benz 200 in Blue with a 1,998cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 57.1%.
Across all 1984 Mercedes-benz 200 models, the average MOT pass rate is 69.3% with a typical mileage of 120,405 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz 200 fails its MOT is brake pipe excessively corroded, accounting for 2,684 recorded failures. If you're considering buying A216 OPW, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz 200 typically stays on UK roads for around 46 years. At 42 years old, this Mercedes-benz 200 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of A216 OPW?
You can check the full history of A216 OPW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was A216 OPW registered?
A216 OPW is a 1984 Mercedes-benz 200, first registered on 30 December 1984.
Is A216 OPW safe to buy?
The MOT history for A216 OPW shows 14 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does A216 OPW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on A216 OPW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.