2014 Audi A1

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Rear Brake cable has restricted free movement caliper return spring missing (1.1.15 (e))

Rear Exhaust has a major leak of exhaust gases tail box (6.1.2 (a))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Front Headlamp lens slightly defective N/S and O/S (4.1.1 (b) (i))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Rear bushes - N/S and O/S (5.3.4 (a) (i))

Nearside Front Outer Brake disc worn, pitted or scored, but not seriously weakened Scored (1.1.14 (a) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Power steering pipe/hose slightly corroded From rack (2.1.5 (g) (i))

Rear Coil spring corroded N/S and O/S (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Rear silencer joint - clamp deteriorated (6.1.2 (a))

Rear Shock absorbers has slight external damage to the casing Casings corroded - N/S and O/S (5.3.2 (b))

Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Service brake binding but not excessively both rear (1.2.1 (f))

Offside Headlamp projects a poor beam pattern

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Central Exhaust silencer slightly loose (8.1.1 (b) (i))

Offside Headlamp aim too high PRS (4.1.2 (a))

Offside Headlamp projects a poor beam pattern

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner rear bush bonding starting to fail, (5.3.4 (a) (i))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner rear bush bonding starting to fail, (5.3.4 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

Offside Rear Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

Rear Direction indicators have a product on the lenses but not adversely affecting light output (1.4.A.2e)

Rear fog lamp has a product on the lens but not adversely affecting light output (1.3.2d)

Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

Offside Rear Stop lamp has a product on the lens but not adversely affecting light output (1.2.1d)

Rear Direction indicators have a product on the lenses but not adversely affecting light output (1.4.A.2e)

Rear fog lamp has a product on the lens but not adversely affecting light output (1.3.2d)

Rear position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords outer sidewall (4.1.D.1a)

Offside Rear Nail in tyre ()