2000 Ford Focus

Central Rear Seat belt not functioning as intended (7.1.2 (c))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing front (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing front (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Both the front and rear sub frames and suspension components subject to excess surface corrosion, no weakness detected at time of test.

Nearside Rear Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to hose (1.1.11 (c))

plastic mouldings covering both outer sills preventing full inspection.

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Both the front and rear sub frames and suspension components subject to excess surface corrosion, no weakness detected at time of test.

Nearside Rear Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to hose (1.1.11 (c))

plastic mouldings covering both outer sills preventing full inspection.

Items removed from driver's view prior to test ()

Nearside Rear Inner Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Inner Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Offside Front Brake hose bulging under pressure (3.6.B.3)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 28% (3.7.B.5b)

Items removed from driver's view prior to test ()

Nearside Rear Inner Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Inner Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corroded exhaust system

rear sub frame corroded

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

advise tracking

corroded exhaust system

rear sub frame corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Headlamp aim too high (1.8)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc excessively scored (3.5.1h)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front brake disc excessively scored (3.5.1h)

Registration plate lamp not working (1.1.5c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)