2005 Audi A4

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Inner Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))

Plastic covers on outer sills

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

both number plate lights slightly dim

both rear tyres out of shape

vehicle has been freshly undersealed in suspension component areas

Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt front (5.3.4 (b) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt front (5.3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Coil spring fractured or broken broken (5.3.1 (b) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Brake disc in such a condition that it is seriously weakened pitted and worn (1.1.14 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake disc in such a condition that it is seriously weakened pitted and worn (1.1.14 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

both number plate lights slightly dim

both rear tyres out of shape

vehicle has been freshly undersealed in suspension component areas

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear handbrake cable mount bracket broken

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs /floors/ inner sills surface corroded (5.3.6 (a) (i))

exhaust heatshield loose

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt front arm (5.3.4 (b) (ii))

Offside Front Upper Suspension arm pin or bush excessively worn rear arm (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect bulb incorrectly fitted? (4.1.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear handbrake cable mount bracket broken

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs /floors/ inner sills surface corroded (5.3.6 (a) (i))

exhaust heatshield loose

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Shock absorbers has slight external damage to the casing both casings corroded (5.3.2 (b))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated foremost (5.3.4 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated foremost (5.3.4 (b) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rearmost (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Shock absorbers has slight external damage to the casing both casings corroded (5.3.2 (b))

Rear Sub-frame damaged but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both chassis legs have surface corrosion around spring mounts (5.3.6 (a) (i))

surface corrosion to brake servo unit

surface corrosion to offside front floor pan

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Shock absorbers has slight external damage to the casing both casings corroded (5.3.2 (b))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated foremost (5.3.4 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated foremost (5.3.4 (b) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rearmost (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Shock absorbers has slight external damage to the casing both casings corroded (5.3.2 (b))

Rear Sub-frame damaged but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both chassis legs have surface corrosion around spring mounts (5.3.6 (a) (i))

surface corrosion to brake servo unit

surface corrosion to offside front floor pan

Brake hose has slight corrosion to ferrules both rear (3.6.B.4e)

Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both front (2.4.G.2)

Oil leak ()

Suspension component mounting prescribed area is corroded but not considered excessive both sides rear (2.4.A.3)

rear suspension slightly corroded

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake hose has slight corrosion to ferrules both rear (3.6.B.4e)

Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both front (2.4.G.2)

Oil leak ()

Suspension component mounting prescribed area is corroded but not considered excessive both sides rear (2.4.A.3)

rear suspension slightly corroded

Nearside Front Window does not open

Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit wearing badly on inner edge. Only just met minimum MOT standard (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front no.plate deteriorating

n/s/r tyre beginning to wear on inner edge and nail in tread

o/s/r tyre beginning to wear on inner edge

Engine covers fitted obscuring some components in the engine bay

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Under-trays fitted obscuring some underside components

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Engine covers fitted obscuring some components in the engine bay

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Under-trays fitted obscuring some underside components

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Registration plate lamp not working (1.1.5c)