1983 Austin Mini Mayfair

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting foot well (6.2.2 (d) (i))

Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Brake cable guide defective and affecting operation bracket on back plate corroded (1.1.15 (d))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear fog lamp not working (4.5.1 (a) (ii))

Central Brake pipe corroded, covered in grease or other material front to rear corroded (1.1.11 (c))

Front Exhaust has a minor leak of exhaust gases flange (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Service brake fluctuating, but not excessively 10kl (1.2.1 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Service brake fluctuating, but not excessively 15kl (1.2.1 (e))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Upper Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Hand brake cable mounting point corroded on back plate

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced subframe mount in boot floor (6.1.1 (c) (i))

Offside Rear brake back plate corroding

Nearside Integral body structure is deformed and structural rigidity is significantly reduced sill (6.1.1 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced back panel at subframe mounting (6.1.1 (c) (i))

Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced w/arch to sill at rear subframe front mounting (6.1.1 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced w/arch to foot well (6.1.1 (c) (i))

Offside Rear Brake cable insecure on back plate (1.1.15 (c))

Offside Rear Integral body structure is fractured and structural rigidity is significantly reduced back panel at subframe mounting (6.1.1 (a) (i))

Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Upper Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced subframe mount in boot floor (6.1.1 (c) (i))

Offside Rear brake back plate corroding

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear back plate slight corrosion

Offside front brake fluctuating, but not excessively (3.7.B.3)

Rear Body has slight corrosion boot floor repaired from inside (6.1.B.2)

Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing at bulk head (6.1.B.2)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement rear bonding failed (2.4.G.2)

Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings 'A' post at sill (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sub frame mounting point to end of sill (6.1.A.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill end pulling away (6.1.B.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear back plate slight corrosion

Offside front brake fluctuating, but not excessively (3.7.B.3)

Rear Body has slight corrosion boot floor repaired from inside (6.1.B.2)

Front Exhaust has a minor leak of exhaust gases flange (7.1.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Body has slight corrosion sill at rear (6.1.B.2)

Nearside Front Body has slight corrosion sill to 'a' post (6.1.B.2)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement rear (2.4.G.2)

Nearside Rear Body has slight corrosion back panel (6.1.B.2)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear back plate corroded

Offside front brake fluctuating, but not excessively (3.7.B.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill & floor (6.1.B.2)

Nearside Front Front passenger door pillar insecure (6.2.B.2)

Nearside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement rear monting (2.4.G.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill & floor (6.1.B.2)

Offside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Front front brake application uneven (3.7.B.2)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside engine mounting deteriorated resulting in excessive movement (6.1.D.1a)

Offside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

gear change bobbins split

Nearside Front Lower Front passenger door pillar deteriorated but the door can still be readily opened and closed (6.2.B.2)

Offside Front Upper Ball joint has slight play (2.2.B.1f)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside front brake application uneven (3.7.B.2)

Offside front brakes release unevenly (3.7.B.4)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

heavy corrosion around n/s/f floor pan area

heavy corrosion around o/s outer sill area

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Horn not working (1.6.2a)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside front brake grabbing severely (3.7.A.2b)

Offside front brake juddering severely (3.7.A.2b)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

front to rear fuel pipe corroded

Brakes imbalanced across an axle (3.7.B.5b)

Hazard warning switch faulty (1.4.B.1d)

Nearside Headlamp not working on dipped beam (1.7.5a)

Body has slight corrosion (6.1.B.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Vehicle structure has slight corrosion (6.1.A.1)

Body has slight corrosion (6.1.B.2)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

front brake application uneven (3.7.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Fuel cap/sealing device sealing washer deteriorated (7.2.4c)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Inner Front Upper Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Inner Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)