1984 Honda CM125C

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. (2.3.1)

Front wheel bearings are slightly rough (2.3.5b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel spoke slightly bent. (4.2.1b)

Oil leak

Rear Brake lever pivots slightly worn (3.1.3a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly corroded. (4.2.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

rear brake pedal fouls the exhaust slightly

Front Brake lever attachment screws missing (3.1.2b)

Headlamp aim too high (1.6)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Stop lamp remains on when the brake is released (1.3.1e)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel spoke slightly bent. (4.2.1b)

Oil leak

Rear Brake lever pivots slightly worn (3.1.3a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly corroded. (4.2.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

nearside chain adjuster not tightened fully

rear brake pedal fouls the exhaust slightly

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Nearside Rear shock absorber has a light misting (2.4.A.1c)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake locking device missing (3.2.A1e)

Headlamp aim too low (1.6)

Rear Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Throttle operating incorrectly (6.2.1f)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Nearside Rear shock absorber has a light misting (2.4.A.1c)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

rear brake pedal has alot of travel and possible signs of slight sticking

rear brake pedal slightly rubs the exhaust

Nearside Rear Footrest insecure (6.2.1a)

Offside Rear Footrest insecure (6.2.1a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Nearside Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Offside Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate deteriorated (6.3.1d)

Steering headbearing has slight free play (2.2.2)

Front Steering headbearing has slight free play (2.2.2)