2003 Honda S2000

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Underbody Corroded

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Underbody Corroded

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Brake hose has slight corrosion to ferrule Nearside and Offside (1.1.12 (f) (i))

Fuel Pipe/s corroded ()

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Fuel Pipe/s corroded ()

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Inner Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Inner Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Fuel Pipe/s corroded ()

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Inner Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Inner Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

slight play in o/s/r wheel bearing

Nearside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front tyres worn to limit

fuel pipes corroding

n/s/r brake binding slightly

All 4 tyre close to wear indicators

Both front tyres worn on inner edges.

Under-trays fitted obscuring some underside components

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

nearside front tyre worn on inner edge

offside front tyre worn on inner edge

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)