1983 Austin Mini Mayfair

Oil leak

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

Brake pedal anti-slip provision missing (3.3.A.1b)

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Front Sub-frame attachment bracket/mounting insecure (2.4.G.1)

Indicator switch insecure (1.4.A.1)

Nearside Front Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Parking brake lever is fouling adjacent parts of the vehicle (3.1.6b)

Nearside Steering rack gaiter insecure (2.2.D.2d)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear fog lamp missing (1.3.2a)

Offside Rear wheel bearing has excessive play (2.6.2)

Offside Steering rack gaiter insecure (2.2.D.2d)

Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Oil leak

Play in steering rack inner joint(s)

Nearside Rear wheel bearing has slight play (2.6.2)

offside inner steering rack joint worn,

tested wet,engine blue smoking,front inner wings coroded.sills/inner sills welded,165/70r10 advan tyres fitted,nearside rear wheel damaged,steering and suspension worn,

Brake pedal anti-slip provision missing (3.3.A.1b)

Brake pedal creeps down when held under pressure (3.3.B.1a)

Brake pedal spongy (3.3.B.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Fuel pipe insecure (7.2.1)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Torque/reaction arm attachment bracket/mounting insecure (2.4.G.1)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Fuel system component leaking (7.2.3)

Rear Stop lamp not working (1.2.1b)

Rear fog lamp missing (1.3.2a)

Rear fog lamp tell tale not working (1.3.1b)

Steering column movement between the shaft and steering wheel (2.1.2b)

tested wet,engine blue smoking,front inner wings coroded.sills/inner sills welded,165/70r10 advan tyres fitted,nearside rear wheel damaged,steering and suspension worn,

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

brake pedal rubber worn,both sill repairs welding suspect,bonnett catch suspect,exhaust modified

front brake juddering slightly (3.7.A.2b)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Steering column top mounting bracket insecure (2.1.2d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

brake pedal rubber worn,both sill repairs welding suspect,bonnett catch suspect,exhaust modified

front brake juddering slightly (3.7.A.2b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Nearside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

sills in poor condition, affected by corrosion with some welded repairs

Oil leak

Horn not working (1.6.2a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear brake application uneven (3.7.B.2)

Oil leak

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

rear brake application uneven (3.7.B.2)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear fog lamp not working (1.3.2b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning switch faulty (1.4.B.1d)

Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Steering rack gaiter split (2.2.D.2d)

Rear Exhaust system not adequately supported (7.1.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

slight judder all brakes

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

front brake application uneven (3.7.B.2)

rear brake application uneven (3.7.B.2)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

rear subframe rusting

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

rear brake application uneven (3.7.B.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)