2004 Subaru Impreza

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Lower Oil leak, but not excessive (8.4.1 (a) (i))

Lower general corrosion underbody

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Additional braking device mounting insecure both rear (1.1.19 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired arch (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired arch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor holed (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting (5.3.6 (a) (i))

Front Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive under body corrosion (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases slight leak from down pipe to centre pipe (6.1.2 (a))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material front to rears (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Fuel Pipe/s corroded ()

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Fuel Pipe/s corroded ()

Brake disc worn, pitted or scored, but not seriously weakened rear discs (1.1.14 (a) (ii))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear brake hose braket insecure

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Offside Front Position lamp not working (4.2.1 (a))

Brake disc worn, pitted or scored, but not seriously weakened rear discs (1.1.14 (a) (ii))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear brake hose braket insecure

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Subframe mounting prescribed area is excessively corroded subframe mount area (2.4.A.3)

under trays fitted

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Front registration plate deteriorated (6.3.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

under trays fitted

Engine covers fitted obscuring some components in the engine bay

Oil leak

Under-trays fitted obscuring some underside components

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Engine covers fitted obscuring some components in the engine bay

Oil leak

Under-trays fitted obscuring some underside components

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Front Parking brake lever has little reserve travel (3.1.6b)

Front Parking brake lever has little reserve travel (3.1.6b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) has restricted free movement (3.5.1k)

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)