1984 Ford Orion

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar mounts n/s & o/s (5.3.6 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Rear Shock absorbers has a reduced damping effect n/s & o/s (5.3.2 (d))

Rear Sub-frame pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Windscreen washer not working (3.5 (a))

All direction indicators not working (4.4.1 (a) (ii))

Emissions unable to be completed due to exhaust (8.2.2.2 (e))

Fuel pipe insecure (6.1.3 (a) (i))

Horn not working (7.7 (a))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

hazards inoperative

Brake pipe inadequately clipped or supported along floor (1.1.11 (d) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar mounts n/s & o/s (5.3.6 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Rear Shock absorbers has a reduced damping effect n/s & o/s (5.3.2 (d))

Rear Sub-frame pin or bush worn but not resulting in excessive movement n/s & o/s (5.3.4 (a) (i))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear wheel arch corroded

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

showing signs of corrosion throughout the vehicle structure

Oil leak

n/s/r wheel arch rusted and holed. (outside 30mm of mountains & suspension ect)

showing signs of corrosion througout

Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear position lamp(s) incomplete (1.1.4a)

Offside Stop lamp emits other than a steady red light (1.2.1e)

SHOWING SIGNS OF CORROSION THROUGHOUT

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Shock absorber has negligible damping effect (2.7.5)

Offside Front Shock absorber has negligible damping effect (2.7.5)