1983 Land Rover Series 3

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Service brake excessively binding Both rear binding (1.2.1 (f))

Windscreen washer not working Both front jets (3.5 (a))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Battery secured with tie strap

Offside Rear Brake back plate leaking oil

Steering linkage ball joint has slight play Steering box drop arm ball joint (2.1.3 (b) (i))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim not tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Brake master cylinder leaking (1.1.10 (b) (ii)) DANGEROUS

Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS

Battery secured with tie strap

Nearside Windscreen wiper blade defective Starting to split (3.4 (b) (i))

Offside Rear Brake back plate leaking oil

Steering linkage ball joint has slight play Steering box drop arm ball joint (2.1.3 (b) (i))

Rear Rear axle metal brake pipes and flexible brake pipe mountings not supported

Transmission brake binding badly

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Steering box has slight free play detected at steering wheel (2.3 (a) (i))

Exhaust has a minor leak of exhaust gases Manifold (7.1.2)

Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Leaf spring has slight wear in an anchor pin and/or bush Front bush (2.4.B.2)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Brakes imbalanced across an axle (3.7.B.5b)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

fan belt won out

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Rear Exhaust system not adequately supported (7.1.1)

Rear Stop lamp not working (1.2.1b)

Direction indicators not working (1.4.A.2c)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Lower Mechanical brake component locking device missing (3.5.1l)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Direction indicator not working (1.4.A.2c)

Offside Front wheel cylinder leaking (3.6.A.1)

Offside rear brake recording little or no effort (3.7.B.5a)