1983 Mercedes-benz Sl

Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Vehicle has been undersealed

o/s/f wheel bearing has slight play

slight leak from steering box

Nearside Front Suspension component mounting prescribed area is excessively corroded anto roll bar mounting (2.4.A.3)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

o/s/f wheel bearing has slight play

slight leak from steering box

Nearside Front door window not working

Offside Front door window not working

brake pipes all round cover in wax oil

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Power steering component(s) leaking (2.3.3b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Oil leak

o/s and n/s front inner wings corroded outwith prescribed areas

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

vehicle has had extensive welding repairs carried out to underside seems secure at time of test

Hazard warning tell tale not working correctly (1.4.B.1e)

Horn not working (1.6.2a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front front brake binding (3.7.B.1)

Offside Headlamp adversely affected by the operation of another lamp (1.7.5c)

Steering box has a significant oil leak (2.2.D.2e)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

vehicle has had extensive welding repairs carried out to underside seems secure at time of test

corrosion in n/s front underbonnet panel but strength not affected

extensive welding repairs have been carried out to underside of vehicle and heavy underseal applied repairs seem secure at time of test

heavy age cracking on all suspension bushes

heavy surface corrosion on all suspension units

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too high (1.8)

Offside Front front brake binding (3.7.B.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

extensive welding repairs have been carried to underside of vehicle and have been heavily undersealed seem secure at time of test only

heavy surface rusting on all underside of vehicle suspension and subframes

Direction indicators not working (1.4.A.2c)

Horn not working (1.6.2a)

Nearside Front Hazard warning lamps inoperative (1.4.B.1b)

Nearside Hazard warning lamps inoperative (1.4.B.1b)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Nearside Rear reflector not red in colour (1.5.1d)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper not operating automatically when switched on (8.2.1b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Hazard warning lamps inoperative (1.4.B.1b)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Oil leak

accelarator rubber missing

general underbody corrosion

slight play front suspension joints

suspension rubbers perishing

Fuel system component leaking (7.2.3)

Nearside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Horn not working (1.6.2a)

Brakes imbalanced across an axle (3.7.B.5b)

Direction indicators not working (1.4.A.2c)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Front coil spring fractured (2.4.C.1a)

Rear fog lamp tell tale not working (1.3.1b)

advice on hole at o/s/f floor and slight corshon at o/s and n/s sills and o/s/f bulkhead

advice slight corshon at rear metal brake pipe front to rear at rear