2008 Nissan Note

Central Rear Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened worn and pitted (1.1.14 (a) (ii))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both front rear bushes (5.3.4 (a) (i))

Offside Front Inner inner wing has corrosion

Shock absorbers has slight external damage to the casing all have corrosion (5.3.2 (b))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

handbrake travel becoming excessive

under body age related corrosion

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Central Rear Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened worn and pitted (1.1.14 (a) (ii))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both front rear bushes (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner inner wing has corrosion

Shock absorbers has slight external damage to the casing all have corrosion (5.3.2 (b))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

handbrake travel becoming excessive

under body age related corrosion

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Sub-frame pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

high level brake light not working

offside dip beam image slightly affected

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Sub-frame pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

both front and offside rear tyres 1.6mm only at test offside rear wearing outer edge

center exhaust fouling crossmember

high level brake light not working

offside dip beam image slightly affected

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension arm pin or bush worn but not resulting in excessive movement nearside front wishbone rear bush (5.3.4 (a) (i))

Unable to see air bag light due to tape.

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Unable to see air bag light due to tape.

Brake fluid not visible (1.1.10 (d) (iii))

Items removed from driver's view prior to test ()

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp light source and lamp not compatible [image] (4.1.4 (c))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Items removed from driver's view prior to test ()

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Body has a sharp edge caused by damage front bumber (6.1.C.1)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Nail in nearside rear tyre

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Nail in nearside rear tyre

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Headlamp aim too low (1.8)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Under-trays fitted obscuring some underside components