2008 Mitsubishi Colt

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill/ suspension mounting area (6.1.1 (c) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases Leaks (6.1.2 (a))

Front Subframe mounting prescribed area damaged but not considered excessive All mounting areas (5.3.6 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both inner bushes (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Edges close to cord (5.2.3 (e))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner and outer sill and suspension mounting area (6.1.1 (c) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both inner bushes (5.3.4 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Various corrosion to the underside and suspension components

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm 175/65/14 (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)