1995 Honda CA125

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front brake disc rusty

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy slightly notchy (2.2.2 (f) (i))

gear change lever pivot worn

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened pitted. (1.1.14 (a) (ii))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

All direction indicators not working all four (4.4.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Stop lamp not working from operation of front switch. (4.3.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened pitted. (1.1.14 (a) (ii))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

front side light not working.

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear tyre looks over sized and very close to rear fender

fuel tank loose bolt missing but secure at time test

gear lever pivot slightly worn

Brake component has an inadequate repair torque arm fitted incorrectly (3.1.5)

Brake locking device missing torque arm split pin missing (3.2.A1e)

Front Stop lamp deteriorated and function impaired switch faulty (1.3.3a)

Rear Floor brake test indicates a sticking brake sticks on when brake is released (3.3.C2c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

fuel tank loose bolt missing but secure at time test

gear lever pivot slightly worn

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever pivots slightly worn (3.1.3a)

Rear Brake pedal pivots slightly worn (3.1.3a)

gear lever pivots slightly worn

vin number differant on vosa records. correct vin entered,may need to amend v5c

Drive chain excessively loose (6.2.1d)

Front Hydraulic brake control feels spongy (3.1.4a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp aim too low and too far to the left. (1.6)

Nearside Rear Direction indicator insecure (1.5.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever pivots slightly worn (3.1.3a)

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

gear lever pivots slightly worn

left cylinder spark plug removed,only firing on right cylinder

rear brake shoes sound grinding when brake applied.wear markers indicate ok,but shoes possibly need replacing

vin number differant on vosa records. correct vin entered,may need to amend v5c

Front Brake lever pivots slightly worn (3.1.3a)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake pedal pivots slightly worn (3.1.3a)

clutch lever pivots slightly worn

gear lever pivots slightly worn

Front Brake disc(s) cracked (3.2.A1g)

Headlamp aim too high and too far to the left. (1.6)

Front Brake lever pivots slightly worn (3.1.3a)

Front Brake master cylinder fluid level low (3.2.B1d)

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Brake pedal pivots slightly worn (3.1.3a)

clutch lever pivots slightly worn

gear lever pivots slightly worn

front and rear tyres cracking on sidewalls, but not showing cords.

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake master cylinder fluid level dangerously low (3.2.B1d)

Front Front wheel bearings are excessively rough (2.3.5b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Drive chain slightly loose (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

rear brake lever rubbing on exhaust