2002 Peugeot Boxer

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

brake matel pipes not cheked propley dur to protaction coated & ubove covers

All brakes judder

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Power steering fluid level below minimum (2.3.1)

Nail in offside rear tyre

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Power steering ram(s) has slight seepage from a seal (2.3.3b)

all brakes juddering

crank pulley deteriorated

Nail in offside rear tyre

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside front brake juddering slightly (3.7.A.2b)

Nearside rear brake juddering slightly (3.7.A.5b)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside front brake juddering slightly (3.7.A.2b)

Offside rear brake juddering slightly (3.7.A.5b)

Nearside Front Brake hose bulging under pressure (3.6.B.3)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nail in offside rear tyre

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside front brake juddering slightly (3.7.A.2b)

Nearside rear brake juddering slightly (3.7.A.5b)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside front brake juddering slightly (3.7.A.2b)

Offside rear brake juddering slightly (3.7.A.5b)

n/s/f c.v gaiter split wear in rack slight power steering leak

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Registration plate lamp not working (1.1.C.1d)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s/f c.v gaiter split wear in rack slight power steering leak

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

o/s/f chasis slightly corroded

Nearside Headlamp aim too low (1.8)

Offside Front Macpherson strut upper support bearing is stiff in operation (2.5.B.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp insecure (1.7.3)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)