2004 Peugeot Boxer

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Vehicle structure has slight corrosion inner wing (6.1.A.1)

Nearside Rear Vehicle structure has slight corrosion inner sill (6.1.A.1)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Vehicle structure has slight corrosion chassis (6.1.A.1)

Vehicle structure has slight corrosion (6.1.A.1)

Central Rear Stop lamp not working (1.2.1b)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing around suspension arm mounting, strut mounting and front subframe mounting. (2.4.A.3)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger area (joins rear cross member) (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc boot has separated. (2.5.C.1a)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded suspension arm mount/jacking point, strut turret and subframe mount. (2.4.A.3)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger area (next to cross member) (2.4.A.3)

Offside Rear rear parking (secondary) brakes imbalanced little effort (3.7.B.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Brake pipe slightly corroded to rear brake pipe corroded in various places but ok at time of test (3.6.B.2c)

Nearside Front Brake pipe slightly corroded both pipes to flexi hoses. ok at time of test (3.6.B.2c)

Nearside Front Bumper insecure ()

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Bumper insecure bumper end cap missing ()

Nearside Rear hand brake cable casing corroded and in poor condition

Nearside Rear light lens damaged but not showing white light at present

Nearside Rear tyre perished and cracking lightly

Offside Front Brake pipe slightly corroded both pipes. ok at time of test (3.6.B.2c)

Offside Front Outer Road wheel slightly damaged (4.2.A.1a)

Offside Front coil spring corroded (2.4.C.1b)

Offside Front inner wing mounting slightly insecure and corroded but secure at time of test.

Offside Rear Upper wheel arch holed but not in a prescribed area.

Offside Rear cable corroded and in poor condition

Offside Rear tyre perished and cracking lightly

Rear Brake pipe slightly corroded brake pipe to compensator slightly corroded but ok at time of test (3.6.B.2c)

Rear exhaust corroded but secure and sound at time of test

Trailer electrical socket deteriorated but the lead can still be securely connected (1.9.3b)

brake pedal anti slip worn but secure and present at time of test.

hand brake warning light on.

seats in the load area of van not bolted to the floor. suspect they are cargo. solid bulkhead fitted.

vehicle is corroded through out structure and behind panels a lot of which can not be fully examined.

Nearside Front Inner wheel arch corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Oil leak ()

Rear bumper support corroded

Brake load sensing valve seized (3.6.E.3)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Inner Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front drive shaft coupling bearing fastener insecure (2.5.C.2b)

Offside Headlamp insecure (1.7.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear fog lamp not working (1.3.2b)

Offside front brake binding (3.7.B.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside front inner wheel arch corroded

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear bumper support corroded

Both front tyres worn outer edge

Front coil spring corroded (2.4.C.1b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Play in steering rack inner joint(s)

Offside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front coil spring corroded (2.4.C.1b)

Both front tyres worn outer edge

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Play in steering rack inner joint(s)

Nearside Inner Body has a projection caused by corrosion (6.1.C.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Parking brake lever has no reserve travel (3.1.6b)

Stop lamp not working (1.2.1b)

high level brake light not working

nearside front tyre becoming worn

offside front tyre close to limits