2005 Mazda 3

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Suspension rod ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension rod ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Fuel Pipe/s corroded ()

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Offside Rear Fuel Pipe/s corroded ()

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front fog light insecure

surface corrosion to sills

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front tyres 3mm tread remaining

Nearside Front foglight insecure

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside wiper split

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear exhaust mounting corroded

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Windscreen washer not working (3.5 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Windscreen washer not working (3.5 (a))

Rear exhaust mounting corroded

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front tyre has small cut on outer side wall

Nearside Rear Outer wheel arch slightly corroded

Offside Rear Outer wheel arch slightly corroded

Rear exhaust mounting slightly corroded

sill covers fitted

Rear Brake pad(s) wearing thin (3.5.1g)

cuts in nsf outer tyre wall

osr tyre 2mm below on inner edge

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Nearside Front Outer small cuts in tyre sidewall

Nearside Front foglight insecure

Nearside Rear Inner Tyre has ply or cords exposed (4.1.D.1b)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Nearside Front Outer small cuts in tyre sidewall

Nearside Front foglight insecure

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front & rear brake pads worn

nearside rear tyre 3mm

offside rear tyre has slight uneven wear on inner edge

rear exhaust mounting corroded

slight uneven wear on nsr tyre inner edge

pass / advise o/s/rear tyre approx 2_4 mm central tread pattern wearing to 1_0 mm on inner tread and wearing uneven

Windscreen wiper does not clear the windscreen effectively (8.2.2)

o/s/r tyre wearing on inner edge

small cuts in o/s/r tyre

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

small cuts in o/s/r tyre

tracking out of tolerance