MOT Status
ExpiredMileage
97,833 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension arm corroded but not seriously weakened On limit for MOT test (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
O/S/F Fog light inoperative
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive Front diff (8.4.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive N/S Sill @ rear (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive O/S Sill @ rear (5.3.6 (a) (i))
Brake performance not tested (1.2.1 (g))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Seat belt missing Receiver (7.1.2 (a))
Offside Rear Seat belt missing Receiver (7.1.2 (a))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S Chassis stiffener behind sill @ rear (5.3.6 (a) (i))
Offside Front Lower Suspension arm likely to fail (5.3.3 (b) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension arm corroded but not seriously weakened On limit for MOT test (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
O/S/F Fog light inoperative
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive Front diff (8.4.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive N/S Sill @ rear (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive O/S Sill @ rear (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear spring sat incorrectly at top mounting
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Suspension components corroded front and rear
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/outrigger (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear spring sat incorrectly at top mounting
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Suspension components corroded front and rear
Brake pipe slightly corroded Both front to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Surface corrosion of both front suspension arms and anti roll bar
Brake pipe slightly corroded Both front (3.6.B.2c)
Brake pipe slightly corroded Both front to rear at rear (3.6.B.2c)
Brake pipe slightly corroded Both rear (3.6.B.2c)
Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Suspension arm corroded but not seriously weakened Both front (2.4.G.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Brake pipe slightly corroded Both front (3.6.B.2c)
Brake pipe slightly corroded Both front to rear (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Suspension arm corroded but not seriously weakened Both front (2.4.G.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
Vehicle's internal headlight adjuster altered to recheck lights
Nearside Headlamp aim beam image kick up to the offside (1.8)
Offside Headlamp aim beam image kick up to the offside (1.8)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
all tyres wearing on inner edges ?
Offside Headlamp aim too high (1.8)
all tyres wearing on inner edges ?
How Reliable is the Mitsubishi Shogun Pinin?
Based on 191,872 MOT tests across 12,414 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AD05 SRU is a 2005 Mitsubishi Shogun Pinin in Silver with a 1,834cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2005 Mitsubishi Shogun Pinin models, the average MOT pass rate is 72.0% with a typical mileage of 58,450 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Shogun Pinin fails its MOT is brake pipe excessively corroded, accounting for 13,041 recorded failures. If you're considering buying AD05 SRU, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Shogun Pinin typically stays on UK roads for around 26 years. At 21 years old, this Mitsubishi Shogun Pinin is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AD05 SRU?
You can check the full history of AD05 SRU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AD05 SRU registered?
AD05 SRU is a 2005 Mitsubishi Shogun Pinin, first registered on 29 July 2005.
Is AD05 SRU safe to buy?
The MOT history for AD05 SRU shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AD05 SRU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AD05 SRU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.