MOT Status
ExpiredMileage
192,006 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material to hose (1.1.11 (c))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive upper shock mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material to hose (1.1.11 (c))
Offside Rear Suspension arm corroded but not seriously weakened very badly corroded (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive upper shock mounting (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a major leak of exhaust gases centre exhaust (6.1.2 (a))
Exhaust has a major leak of exhaust gases exhaust back box (6.1.2 (a))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS
Nearside Rear Suspension arm likely to become detached lower arm (5.3.3 (a) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Offside Rear Suspension arm likely to become detached lower arm (5.3.3 (a) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
under body corrosion
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Registration plate lamp insecure (4.7.1 (c) (i))
Offside Front tyre worn on inner edge
Rear exhaust heat sheild loose
Rear suspension corroded
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a))
Nearside Rear Registration plate lamp insecure (4.7.1 (c) (i))
Offside Front tyre worn on inner edge
Rear exhaust heat sheild loose
Rear suspension corroded
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit Inner edge (4.1.E.1)
Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Coil spring not correctly located (2.4.C.2)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
cut on o/s/f tyre not down to cords
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
cut on o/s/f tyre not down to cords
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front and rear discs corroded and worn
Front registration plate insecure (6.3.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Inner Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AD06 HDL is a 2006 Ford S-max in Blue with a 1,997cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 52.2%.
Across all 2006 Ford S-max models, the average MOT pass rate is 70.6% with a typical mileage of 91,240 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying AD06 HDL, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 20 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AD06 HDL?
You can check the full history of AD06 HDL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AD06 HDL registered?
AD06 HDL is a 2006 Ford S-max, first registered on 13 July 2006.
Is AD06 HDL safe to buy?
The MOT history for AD06 HDL shows 23 tests with a 52.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AD06 HDL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AD06 HDL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.