2006 Honda Xr 125 L-5

Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d))

Fuel cap ineffective (6.1.3 (b) (i))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Wheel spindle locking device missing (5.2.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Headlamp aim too high (1.6)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Steering movement slightly 'notchy' (2.2.1b)

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Steering movement slightly stiff (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Steering movement slightly stiff (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Steering movement slightly 'notchy' (2.2.1b)