2009 Ford Focus

Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component pin or bush excessively worn wishbone bush ( rear bush) (5.3.4 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge low on outer edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge worn uneven on inner edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge going out of shape (5.2.3 (e))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge perished in tread (5.2.3 (e))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Windscreen washers poor

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Upper Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge going out of shape (5.2.3 (e))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge perished in tread (5.2.3 (e))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Windscreen washers poor

Front wipers smear the screen

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front wipers smear the screen

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Items removed from driver's view prior to test

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Power steering fluid level low, but not below minimum (2.3.1)

Nail in nearside rear tyre

Nail in offside rear tyre

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)