MOT Status
ExpiredMileage
123,042 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Inner Position lamp not working (4.2.1 (a))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside front day running light not working
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)
slight wear on inner edge on both front tyres
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 3008?
Based on 1,383,456 MOT tests across 143,593 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AD10 PYS is a 2010 Peugeot 3008 in Grey with a 1,598cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 2010 Peugeot 3008 models, the average MOT pass rate is 71.3% with a typical mileage of 72,156 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 3008 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 13,051 recorded failures. If you're considering buying AD10 PYS, it's worth having these areas checked by a mechanic before committing.
The Peugeot 3008 typically stays on UK roads for around 17 years. At 16 years old, this Peugeot 3008 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AD10 PYS?
You can check the full history of AD10 PYS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AD10 PYS registered?
AD10 PYS is a 2010 Peugeot 3008, first registered on 25 August 2010.
Is AD10 PYS safe to buy?
The MOT history for AD10 PYS shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AD10 PYS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AD10 PYS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.