MOT Status
ExpiredMileage
124,788 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side seal (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by jacking point. (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust system not adequately supported (7.1.1)
Nearside Front Body has a sharp edge caused by damage door (6.1.C.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Knocking on front
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear both arches corroded
all components and chassis/floors rusting bad
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
all components and chassis/floors rusting bad
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Engine covers fitted obscuring some components in the engine bay
Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside front brake binding (3.7.B.1)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Engine covers fitted obscuring some components in the engine bay
Nearside Headlamp aim too low (1.8)
Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front brake pads 75% worn
Rear Exhaust system not adequately supported (7.1.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AD52 CNC is a 2003 Mazda 6 in Black with a 1,798cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying AD52 CNC, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AD52 CNC?
You can check the full history of AD52 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AD52 CNC registered?
AD52 CNC is a 2003 Mazda 6, first registered on 30 January 2003.
Is AD52 CNC safe to buy?
The MOT history for AD52 CNC shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AD52 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AD52 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.