2006 Ford Focus

Front Coil spring corroded (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Fuel Pipe/s corroded ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Fuel Pipe/s corroded ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake hose has slight corrosion to ferrule all 4 (1.1.12 (f) (i))

Coil spring corroded both rears (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Coil spring corroded both rears (5.3.1 (b) (i))

Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive both rear inner sills (1.1.21 (e) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Gearbox mounting defective ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake pad(s) wearing thin (3.5.1g)

Central Front Tyre has ply or cords exposed inner edge (4.1.D.1b)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner edge (4.1.D.1a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Outer Front registration plate deteriorated but not likely to be misread (6.3.1d)

Under-trays fitted obscuring some underside components

An item not tested (Manual)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Exhaust system not adequately supported (7.1.1)

Nail in offside rear tyre

Outer Front registration plate deteriorated but not likely to be misread (6.3.1d)

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Headlamp aim too far to the right (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim too far to the right (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust system not adequately supported (7.1.1)