2007 Ford Focus

Nearside Front Tyre wearing from inner tread

Oil leak, but not excessive Engine oil (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened Including suspension arms on both sides (5.3.3 (b) (i))

Front Inner Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Front Sub-frame corroded but not seriously weakened and rear (5.3.3 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Direction indicator slightly discoloured both sides (4.4.3 (a))

Suspension component corroded but not seriously weakened all (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Direction indicator slightly discoloured both sides (4.4.3 (a))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear parking brake has little reserve travel

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear coil spring corroded both sides (2.4.C.1b)

Exhaust heat shield cover is insecure.

Exhaust system slightly deteriorated and corroded but still is adequately supported.

Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Offside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Service brakes (53%) and Parking brakes (18%) have only just met the requirements.

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Stop lamp not working n/s and o/s (1.2.1b)

Exhaust heat shield cover is insecure.

Exhaust system slightly deteriorated and corroded but still is adequately supported.

Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Offside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Service brakes (53%) and Parking brakes (18%) have only just met the requirements.

Exhaust system not adequately supported centre and rear sections (7.1.1)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Nearside Front Tyre worn close to the legal limit bald on inner tread (4.1.E.1)

Nearside Front tyre has cut in sidewall

Offside Front Tyre worn close to the legal limit bald on inner tread (4.1.E.1)

Offside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Oil leak sump ()

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

exhaust heat shield loose

offside rear parking brake low effort

unable to check bearing on osr due to brake bind

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

exhaust corroded

exhaust support bracket broken

Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

heat shield loose

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)