2007 Fiat Punto

Underside of vehicle covered in underseal

Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Rear wiper poor

Reverse lamp inoperative

Underside of vehicle covered in underseal

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened incluiding multiple suspension components (5.3.3 (b) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear axel corroded including rear shocks

fuel tank strap corroded

Front Sub-frame corroded but not seriously weakened + all suspension arms and hubs (5.3.3 (b) (i))

Rear axle and shocks corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a minor leak of exhaust gases CAT to front pipe joint (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened + all suspension arms and hubs (5.3.3 (b) (i))

Rear axle and shocks corroded

corrosion in rear axle beam,subframe,struts -underside generally

Nearside Brake pipe corroded, covered in grease or other material front to back unions at joiner (1.1.11 (c))

heat shield loose

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Brake pipe corroded, covered in grease or other material front to back unions at joiner (1.1.11 (c))

heat shield loose

General surface corrosion under vehicle

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

General surface corrosion under vehicle

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

General surface corrosion under vehicle

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

General surface corrosion under vehicle

coil spring corroded Both rear (2.4.C.1b)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

General surface corrosion under vehicle

Nearside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

coil spring corroded Both rear (2.4.C.1b)

corrosion in coil springs

Rear position lamp(s) slightly affected by the operation of another lamp both (1.1.A.3f)

Coolant leak

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front coil spring broken (2.4.C.1a)

Coolant leak

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Items removed from driver's view prior to test

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)