2010 Toyota Hilux

Offside Front Anti-roll bar ball joint has slight play drop link (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security crossmember (6.2.2 (d) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced rear chassis (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced rear crossmembers (6.1.1 (c) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive rear shock mounts both sides (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive Anti roll bar mount - both sides. (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material All pipes. (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Shock absorber mount - both sides. (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Cross member. (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive Anti roll bar mount - both sides. (5.3.6 (a) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material All pipes. (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Shock absorber mount - both sides. (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Cross member. (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shock absorber mount. (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shock absorber mount. (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Rear cross member. (6.1.1 (c) (i))

Headlamp aim projected beam image is obviously incorrect Both sides. (4.1.2 (c))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Central cross member. (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shock absorber mount. (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shock absorber mount. (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Rear cross member. (6.1.1 (c) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Front Headlamp aim unable to be tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Brake prescribed area is excessively corroded (1.1.21 (e) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Trailer electrical socket (13 pin) not operating the trailer lamps as intended (4.10 (c) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Service brake binding but not excessively both rear (1.2.1 (f))

Service brake fluctuating, but not excessively all wheels (1.2.1 (e))

Shock absorbers has a reduced damping effect both rear (5.3.2 (d))

Shock absorbers has slight external damage to the casing rotten (5.3.2 (b))

Trailer electrical socket insecure (4.10 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

All tyres are perished on the sidewalls

Both front tyres are worn uneven

Cut in the offside front tyre tread

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

cut offside rear tyre

Offside Front coil spring broken (2.4.C.1a)

cut offside rear tyre

Nearside Rear Registration plate lamp not working (1.1.C.1d)