2002 Toyota Corolla

Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Front Service brake binding but not excessively BOTH SIDES (1.2.1 (f))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

UNDER BODY COVERED WITH UNDERSILL

Front Headlamp has a product on the light source but not seriously reducing light output Both sides (4.1.4 (b))

Front Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Both sides inner sills (6.1.1 (c) (i))

Rear Service brake binding but not excessively Both sides (1.2.1 (f))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))

Sill covers fitted to vehicle

Nearside Front Service brake excessively binding (1.2.1 (f))

Front Headlamp has a product on the light source but not seriously reducing light output Both sides (4.1.4 (b))

Front Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Both sides inner sills (6.1.1 (c) (i))

Rear Service brake binding but not excessively Both sides (1.2.1 (f))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))

Sill covers fitted to vehicle

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all over (6.2.2 (d) (i))

Front Service brake binding but not excessively (1.2.1 (f))

Front Service brake binding but not excessively 'Both sides' (1.2.1 (f))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

oil leak from engine

under car very russty

Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Offside Front Service brake excessively binding unable to test wheel bearing (1.2.1 (f))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

under car very russty

Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge and starting perish (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

oil leak from engine

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Both rear tyres have uneven tread wear on inner edge.

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Both rear tyres have uneven tread wear on inner edge.

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)