2002 Ford Ka

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor and sill. rear of door near seat belt mount. and rear of sill near axle mount (6.1.B.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

wipers smear screen slightly

Anti-roll bar has slight play in a ball joint (2.4.G.2)

parts of vehicle have been under coated

steel brake pipes slightly corroded

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on main beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Coolant leak

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

parts of vehicle have been under coated

steel brake pipes slightly corroded

Nearside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Tyre(s) incorrect because tyres with different aspect ratios are fitted on the same axle. (4.1.A.1a)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Items removed from driver's view prior to test

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Outer Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Inner Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Upper Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s/f wheel arch linner damaged

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)