2004 Suzuki GS500

Front Brake slight rubbing

Offside Front Front brake master cylinder level can not be veiwed

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre has slight cracking

Front Brake lever has inadequate reserve travel (3.1.3b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake fluid reservoir slightly corroded sight glass (3.2.B1b)

Front Brake lever pivots slightly worn (3.1.3a)

drive chain has slight tight spot

rear tyre starting to crack up between the tread

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

All position lamps slightly affected by the operation of another lamp (1.1.3b)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Rear spring corroded but not seriously weakened (2.4A1b(ii))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Stop lamp remains on when the brake is released (1.3.1e)

Nearside Rear Motorcycle structure excessively damaged (6.1.1a)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp remains on when the brake is released (1.3.1e)

Rear suspension component slightly corroded. (2.4.A.1a)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front tyre cracking

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension component slightly corroded. (2.4.A.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))