2004 Skoda Fabia

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear exhaust box corroded

intercooler wet with oil

undertrays fitted

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear exhaust box corroded

intercooler wet with oil

undertrays fitted

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Vehicles internal headlight adjuster altered to recheck lights ()

undertrays fitted

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp aim too low (4.1.2 (a))

Vehicles internal headlight adjuster altered to recheck lights ()

undertrays fitted

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Service brake excessively binding Both sides rear (1.2.1 (f))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Service brake excessively binding Both sides rear (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear silencer outer skin corroded

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Rear silencer outer skin corroded

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

nearside rear seat belt not checked due to child seat fitted

offside rear wheel tight to rotate

Rear exhaust outer skin corroded.

Brake hose excessively deteriorated Both sides front (3.6.B.4d)

Nearside Headlamp aim too far to the right (1.8)

Offside Headlamp aim too high (1.8)

Rear exhaust outer skin corroded.

Nail in nearside front tyre

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Rear damper shrouds loose

Rear exhaust deteriorating

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear silencer corroded

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front tyres wearing on outer edges, rear silencer corroded

Nearside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Trailing arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)