2007 Aprilia SX 50 MY06

Direction indicators flashing less than 60 times a minute not flshing at all. (1.5.1c)

Drive chain excessively loose (6.2.1d)

Front Brake lever pivots excessively worn front brake been replced with bolt. (3.1.3a)

Horn control defective comes on when turning bars. (1.7.2a)

Nearside Front Direction indicators not working (1.5.1c)

Rear Roller brake test indicates a binding brake master cylinder pin fault. (3.3.A1a)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear position lamp does not illuminate immediately when it is switched on bike cut out would not restart. (1.1.3a)

Registration plate deteriorated (6.3.1d)

Wheel alignment incorrect which adversely affects the steering steering out of alignment with front wheel. (2.5.1)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Front shock absorber has light misting of stanchion (2.3.3)

Nearside Front Wheel has a slightly distorted bead rim. flat spot. (4.2.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear rear tyre side walls slight cracking.

Front Brake disc(s) slightly worn (3.2.A1l)

suspect fuel leak

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Front Brake disc(s) slightly worn (3.2.A1l)

suspect fuel leak

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Horn not working (1.7.3a)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Rear reflector on motorcycle missing (1.4.1)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake disc(s) securing bolt(s) missing (3.2.A1g)

Fuel system component leaking (7.2.1a)

Headlamp aim too low (1.6)

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Headlamp insecure (1.2.3b)

Nearside Front wheel spindle securing nut locking device missing (2.3.3a)

Offside Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear Brake disc(s) insecure (3.2.A1g)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension movement is excessively stiff (2.4.A.3b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear Drive chain excessively tight (6.2.1d)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal has inadequate reserve travel (3.1.3b)