2001 Seat Inca

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Suspension component mounting prescribed area is corroded but not considered excessive @LEAF SPRING HANGER POINT OSR/NSR (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension component pin or bush slightly worn both upper suspension mountings have slight lift/play (5.3.4 (a) (i))

Nearside Front Obligatory mirror slightly damaged passenger mirror damaged (3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Offside Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Horn not working (1.6.2a)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Front Headlamp aim too low (1.8)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Centre Front exhaust weakened by corrosion

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Centre Front exhaust weakened by corrosion

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Headlamp aim too high (1.8)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too high (1.8)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe excessively corroded (3.6.B.2c)

Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Body has a sharp edge caused by damage (6.1.C.1)

Nearside Front Brake hose bulging under pressure (3.6.B.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim too high (1.8)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Spare wheel carrier insecure (6.4.2)

Under-trays fitted obscuring some underside components

Front bumper insecure

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Brake load sensing valve linkage stiff (3.6.E.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Brake pad(s) wearing thin (3.5.1g)