2007 Yamaha XT125

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust mounting deteriorated. (7.1.1.c)

Rear suspension bush has slight free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1b)

Tyre worn close to the legal limit (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust mounting deteriorated. (7.1.1.c)

Front shock absorber seal failed and leaking oil (2.3.3)

Horn not working (1.7.3a)

Rear suspension bush has slight free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1b)

Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Handlebar handgrip not secure to handlebars. (2.1.1c)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Riders seat insecure (6.2.1a)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bush has slight free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1a)

Drive chain slightly tight (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

clutch cable starting to fray

number plate light inopperative

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b)

Fuel cap sealing washer missing (7.2.2c)

Handlebar deformed (2.1.1b)

Horn is not a constant note (1.7.3c)

Offside Front Direction indicator not working (1.5.1c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

both hand grips loose but no secure

Front Brake lever is bent but brake can still be readily applied (3.1.3c)