2002 Honda CB900

Exhaust noisy (8.1.1 (a))

Exhaust slightly loose (6.1.2 (a))

Offside Front Brake master cylinder slightly loose (1.1.10 (c))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies control 2 (1.3.1a)

Headlamp aim beam image kick up to the offside (1.6)

Exhaust has part of the system missing (7.1.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Offside Front Direction indicator damaged and function impaired (1.5.3a)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Registration plate font not substantially similar to the prescribed font (6.3.4d)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

clutch and brake levers after market very sharp ends

mirrors

oil low

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Nail in rear tyre

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

exhaust mount cracked

Headlamp aim too high (1.6)

Nail in rear tyre

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

exhaust mount cracked

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain lightly rubbing (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Drive chain lightly rubbing (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)