2005 Lexus RX300

Front Inner Brake disc worn, pitted or scored, but not seriously weakened slight corrosion (1.1.14 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement inner rear bushes both sides (5.3.4 (a) (i))

Fuel Pipe/s corroded filler neck and return pipe ()

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. both sides (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area damaged but not considered excessive both inner sills slightly damaged (5.3.6 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides 235/55 18 3mm (5.2.3 (e))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened slight corrosion (1.1.14 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement inner rear bushes both sides (5.3.4 (a) (i))

Fuel Pipe/s corroded filler neck and return pipe ()

Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. both sides (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area damaged but not considered excessive both inner sills slightly damaged (5.3.6 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides 235/55 18 3mm (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement both front inner rear bushes perished (5.3.4 (a) (i))

Fuel Pipe/s corroded filler neck and return pipe slightly corroded ()

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread cracking (0.1 (b))

Rear Suspension arm corroded but not seriously weakened all rear arms slightly corroded (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area damaged but not considered excessive both rear inner sills slightly damaged (5.3.6 (a) (i))

Front Headlamp aim too high both sides high due to levelling device being broken (4.1.2 (a))

Rear Exhaust system insecure rear mount broken (6.1.2 (a))

Rear Headlamp levelling device inoperative broken (4.1.5 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement both front inner rear bushes perished (5.3.4 (a) (i))

Fuel Pipe/s corroded filler neck and return pipe slightly corroded ()

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread cracking (0.1 (b))

Rear Suspension arm corroded but not seriously weakened all rear arms slightly corroded (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area damaged but not considered excessive both rear inner sills slightly damaged (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

front engine oil leak

rear prop oil leak from gearbox

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement inner suspension bushes perishing (5.3.4 (a) (i))

Fuel Pipe/s corroded filler neck and return pipe ()

Offside Rear Inner Nail in tyre ()

Oil leak, but not excessive from rocker cover gasket (8.4.1 (a) (i))

Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm corroded but not seriously weakened all rear suspension arms rusty (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area damaged but not considered excessive both rear control arms (5.3.6 (a) (i))

Fuel Pipe/s corroded ()

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sills both sides (7.1.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened and components (5.3.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Fuel Pipe/s corroded ()

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sills both sides (7.1.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened and components (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Lower Macpherson strut corroded but not seriously weakened both sides and recommend replacement before next MOT (5.3.3 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively both wipers (3.4 (b) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Lower Macpherson strut corroded but not seriously weakened both sides and recommend replacement before next MOT (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin and discs deteriorating (1.1.13 (a) (ii))

gearbox prop seal leak

n/s/f outer edge tyre wearing and small nail in tread

n/s/r hand brake roller result low reading

rear number plate deteriorating

rear sway bars front bushes wearing

sill covers fitted making inspection difficult

both rear inner chassis starting to deteriorate

rear suspension stabilizer arm bushes detriorating

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit centre tread (4.1.E.1)

rear brake pads wearing down

rear number plate deteriorating

underbody, engine and sill covers fitted

Front Brake pad(s) less than 1.5 mm thick Both (3.5.1g)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit centre tread (4.1.E.1)

rear brake pads wearing down

rear number plate deteriorating

underbody, engine and sill covers fitted

Nearside Front Tyre worn close to the legal limit outer edge (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear parking brake efficiency poor

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Oil leak ()

Rear Tyre worn close to the legal limit Both tyres Centre tread (4.1.E.1)

parking brake efficiency meets minimum requirement only

underside,engine and sill covers fitted

Nearside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Tyre worn close to the legal limit both (4.1.E.1)

n/s /f outer edge worn on tyre

oil leaks

Nearside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Tyre worn close to the legal limit both (4.1.E.1)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

n/s /f outer edge worn on tyre

oil leaks

Engine covers fitted obscuring some components in the engine bay

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

rear brake pads wearing down

rear wiper blade split

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

both sets of rear pads wearing down

Both sets of rear brake pads wearing low

Child seat fitted not allowing full inspection of adult belt

Front Brake pad(s) wearing thin (3.5.1g)