2007 Mazda 3

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Lower Suspension arm pin or bush excessively worn front radius arm inner bush (5.3.4 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Shock absorbers insecurely attached not fitted correctly (5.3.2 (a) (i))

Offside Rear Lower Suspension arm pin or bush excessively worn front radius arm inner bush (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes both sides (5.3.4 (a) (i))

Front brake backplates both sides desintegrating

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Lower Suspension arm corroded but not seriously weakened transverse arms both sides (5.3.3 (b) (i))

Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive front of rear trailing arm mounts both sides (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bushes both sides (5.3.4 (a) (i))

Front brake backplates both sides desintegrating

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Lower Suspension arm corroded but not seriously weakened transverse arms both sides (5.3.3 (b) (i))

Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive front of rear trailing arm mounts both sides (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

General underbody corrosion to vehicle body and structure

Nearside Front Tyre worn close to legal limit/worn on edge ON 1.6MM TREAD (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 3mm tread (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened All rear suspension arms (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

General underbody corrosion to vehicle body and structure

Nearside Front Tyre worn close to legal limit/worn on edge ON 1.6MM TREAD (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 3mm tread (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened All rear suspension arms (5.3.3 (b) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill corrosion (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill corrosion (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened and components (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Lower Suspension arm pin or bush excessively worn inner suspension arm bush (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Offside Rear Lower Suspension arm pin or bush excessively worn inner suspension arm bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened inner faces (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Leaf spring fractured (5.3.1 (b) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Brake pad(s) wearing thin (3.5.1g)

Items removed from driver's view prior to test

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)