2009 Honda CBF125

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too low (4.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

All direction indicators not working (4.4.1 (a) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain worn but not considered excessive (6.2.1e)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Headlamp aim too high (1.6)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Front Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Rear Direction indicator insecure (1.5.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly 'notchy' (2.2.1b)

Brake pedal cannot be released smoothly (3.1.3d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))