2012 Yamaha YBR125

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Clutch lever bent (6.2.7 (b))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear tyre is slightly perished

clutch lever pivot very worn

Both brakes noisy in operation but no visual defects

Drive chain slightly loose (6.2.1d)

Rubber footrest cushions missing but steel pegs secure and meet the necessary requirement

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Rear suspension bush has excessive free play both swinging arm bushes (2.4.A2a(i))

Rubber footrest cushions missing but steel pegs secure and meet the necessary requirement

Clutch lever bent (6.2.1g)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)