2002 Fiat Stilo

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Rear Axle swivel joint has excessive movement between a swivel joint and its housing (2.5.A.1b)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Axle swivel joint has excessive movement between a swivel joint and its housing (2.5.A.1b)

Offside Rear Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit on legal limmit (4.1.E.1)

Nearside Outer Body has slight corrosion sill (6.1.B.2)

Offside Outer Body has slight corrosion sill (6.1.B.2)

exhaust backbox loose

interior mirror missing

rear exhaust rubber perrished

Emissions not tested due to state of exhaust (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front coil spring broken (2.4.C.1a)

Offside Front Tie bar/rod attachment bracket/mounting insecure (2.4.G.1)

Nearside Outer Body has slight corrosion sill (6.1.B.2)

Offside Outer Body has slight corrosion sill (6.1.B.2)

exhaust backbox loose

interior mirror missing

rear exhaust rubber perrished

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front coil spring corroded (2.4.C.1b)

Rear Exhaust has a minor leak of exhaust gases section (7.1.2)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Rear Brake pad(s) wearing thin (3.5.1g)

rear tyres in poor condition

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

rear tyres in poor condition

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

airbag light on

front tyres wearing on edges

slight blow from center pipe

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)