2004 Ford Fiesta

rear bump stops perished

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

rear bump stops perished

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Nearside Track rod end ball joint has slight play recommend replacement (2.1.3 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge 3.0mm (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 3.0mm (5.2.3 (e))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure sidewall (4.1.D.1b)

Offside Front coil spring broken (2.4.C.1a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Rear fog lamp emits a light other than red (1.3.2e)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too high (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front brake discs slightly lipped

front brake pads slightly worn

nearside front tyre has a small cut to the tread but not deep enough to reach the cords

offside rear tyre starting to pearsh

small stone chips to windscreen

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

n/s/f 2mm inner edge

n/s/r 2mm outer edge